Previous Release / Preview Threads Merged

    Hi, problems with 3dconnexion peripheral, with preview 10 once Enscape is started the controller no longer works in SketchUp. The software continues to work fine but navigation with 3dconnexion in SketchUp is lost. I tried to reinstall 3dconn drivers after p10 but nothing done. I installed preview 9, everything is back to working. Please pay close attention to this problem !!!! Thank you.

    HI guys, thanks for this version, incredible!

    Just a thing on my side, after updating my NVidia RTX 2080 super max-q with the drivers 471.11, everything seems slower than before on the same file.


    Is it a known issue?

    Quote from Steph

    HI guys, thanks for this version, incredible!

    Just a thing on my side, after updating my NVidia RTX 2080 super max-q with the drivers 471.11, everything seems slower than before on the same file.


    Is it a known issue?

    Nice tip , Don't update your drivers for the lastest ones as they might be experimental and u may face problem...

    Quote from Steph

    Just a thing on my side, after updating my NVidia RTX 2080 super max-q with the drivers 471.11, everything seems slower than before on the same file.


    Is it a known issue?

    Hi Steph,


    thanks for your report. No, we're currently not aware of any issues with that driver. Do you experience any different behavior with the previous driver?


    However there's still a known issue in this Preview version that might cause a quite noticeable input lag when navigating, despite a high rendering framerate. We've fixed that in the meantime. So if for example navigation feels "indirect" or "laggy", but image movement is still smooth, it's probably this.

    You can check your framerate with external tools such as https://gpuopen.com/ocat/ to get an idea, if it's a performance or input lag related issue.


    We'll release another Preview version where this is fixed next week!

    Here's the Release Notes for the latest Enscape v3.1 Preview - Version 11.

    Please refer to this article for instructions on how to download the Preview version.

    Note: Preview versions are not production proven, so make sure to observe the Known Issues in the attached .pdf document and please report any other issues back to us either on this thread or via the normal support channels.


    What’s included:


    There are no new features in this preview release, which address mainly bug fixes and stability improvements.

    Your feedback at this stage of development is highly appreciated.


    Notable Bug Fixes:

    • Asset Editor was crashing after exporting Material with Video Texture

    A full list of Bug Fixes and Known Issues can be found in the attached document. Please refer to the bug's / issue's associated ID number when contacting Enscape Support in relation to any of the listed items.

    It still doesn't work with my computer when RTX is turned on, even with an empty model. It goes to 5% and then quits, without giving any error or anything else. Works fine when RTX is turned off in Enscape's settings.


    (RTX 2070, Sketchup 2018, Windows 10)

    Hi, problems with 3dconnexion peripheral, with preview 10/11 once Enscape is started the controller no longer works in SketchUp. The software continues to work fine but navigation with 3dconnexion in SketchUp is lost. I tried to reinstall 3dconn drivers after p10 but nothing done. I installed preview 9, everything is back to working. Please pay close attention to this problem !!!! Thank you.

    Quote from 4interiors

    Hi, problems with 3dconnexion peripheral, with preview 10 once Enscape is started the controller no longer works in SketchUp. The software continues to work fine but navigation with 3dconnexion in SketchUp is lost. I tried to reinstall 3dconn drivers after p10 but nothing done. I installed preview 9, everything is back to working. Please pay close attention to this problem !!!! Thank you.

    Thanks for the report! Can you please also briefly send in a Feedback report and include a link to this thread or your feedback again in the submission form? Just in case it is required to troubleshoot the cause behind this. Much appreciated. :)

    We've just released the new Enscape version 3.1!


    Have a look at the blog post showing off the new features and additions.


    There are several options to upgrade:

    • Follow the link in your trial registration email
    • Click the update link in the in-program notification
    • Open the "About" window and click the Download Area link

    For detailed questions and issues, feel free to write us at support@enscape3d.com or use this thread.


    Changes in Version 3.1


    New Features:


    • Brand New Material Library: An addition to the Enscape Material Editor, the Material Library provides you access to new and ever expanding PBR materials to use in your projects (More info).
    • Material Editor User Interface (UI) Overhaul: Enscape’s Material Editor UI has been reworked to provide a more intuitive workflow when working with materials and textures (More info).
    • NVIDIA DLSS Support: Enjoy NVIDIA's Deep Learning Super Sampling technology. The deep learning-based upscaling technique renders internally at a lower resolution, whilst the output remains a clean and sharp high-resolution image for videos and VR walkthroughs (More info).
    • Panorama Gallery: Tell your story better with the Panorama Gallery feature. Share and combine a project's Panoramas to provide a new way to tour a project (More info).
    • Material Editor for Revit: Bringing the power of the Enscape Material Editor to our Revit users (More info).
    • Simplified Asset Package: Add context without complexity to designs with our new Simplified Assets. Perfect for early design phases, these new assets won’t distract from your idea/intent and will help you communicate your vision to clients more clearly (More info).
    • Ray-traced Sun Shadows: Adding realism to any exported image, this feature means sharper and more accurate shadows that will bring your scenes closer to reality (More info).


    Changelog v3.0 -> v3.1:

    • General Settings -> Performance is now named 'Rendering', where the options available there have also changed.


    [UPDATE] : Bug Fixes and Known Issues:


    Additional Known Issues

    • Ivy Bridge CPU's are missing a feature required for the Denoiser, resulting in a crash when enabled. Please disable the Denoiser by adding the line:
      r_giNvDenoising, 0
      to the UserPre.cfg. That file should be placed in C:\Users\%username%\AppData\Roaming\Enscape\ for a default installation if there is no UserPre.cfg file in that location. Disabling the Denoiser in the UI alone will not work.
    • DLSS requires Auto Exposure to be enabled, or ghosting / smearing may well occur. Disable DLSS if Auto Exposure is not required.
    • If decals are not displaying correctly in Enscape with Revit, the suggested workaround is to downgrade to Enscape v3.0.


    Please find a list of the most common customer facing bugs that were fixed during 3.1 development attached as a .pdf below. The document also contains any current Known Issues. We provide this list as a courtesy to our users and is not a complete list of all bug fixes during the development cycle. Please refer to the Bug ID if you have further questions regarding any of these.



    Finally, the Enscape team would like to thank all users who contributed to testing and providing feedback during this version's development cycle!