Previous Release / Preview Threads Merged

Reminder: If you encounter any issues with Enscape (including installation problems) or your subscription please reach out to our dedicated support team directly through the Help Center or by using the Support button as detailed here. Thank you for your understanding.
  • This release #13 has been crashing for me quite often, during export right around when it gets to 99% on the progress bar. Earlier previews do not have any problems with exactly the same files. I'll try sending feedback from Sketchup next time I have a chance to test it.

    • Official Post

    This release #13 has been crashing for me quite often, during export right around when it gets to 99% on the progress bar. Earlier previews do not have any problems with exactly the same files. I'll try sending feedback from Sketchup next time I have a chance to test it.

    Please definitely send in a report indeed so we can analyze this further and potentially fix for preview 14, if it boils down to a bug or such especially. I reckon that you also updated your GPU drivers just to make sure?


    Thanks in advance andybot .


    Thanks for the report.


    Does this only occur in preview 13, and using our latest release or preview 12 looked did not produce these lightleaks or lighting artifacts? Feel free to gladly share some comparison renderings as well.


    If you might've experienced this before, please definitely check out this FAQ article here. And the excerpt of interest: "This behavior can be resolved/improved by increasing the thickness of the corresponding affected geometry (in this case the walls/ceiling) or by creating a second non-transparent wall behind, and in some cases, if you have a rather large ground plane in your project, reducing its size may help as well."

    • Official Post

    Dear Forum Community,


    We've just released the latest Enscape v3.5 Preview - Version 14.


    BUGFIXES:

    Fixed Crashes When Loading Assets

    The previous Preview release had an issue when loading assets with custom collision models.


    Fixed Backward Compatibility Issue for Custom Assets

    Custom assets created with the previous Preview release could not be loaded by some older Enscape versions. This is now fixed. If you already ran into the problem, please re-export your custom assets. If you cannot load custom asset projects with older Enscape versions, please re-save them as well.


    Archicad – Fixed Duplicate Material Entry After Material Library Import

    Previously, when replacing a material in the Enscape Material Editor with one from the Material Library, both the old and the imported material would be listed. Now, the material is replaced correctly.


    Please refer to this article for instructions on how to download the Preview version.


    If you wish to get a full overview of what's been added with Enscape 3.5 Preview 13 and full releases prior, check out this release/preview notes gathering thread here.


    Warning: Preview versions are not production-proven, so be aware that there can be issues, and please report any of them back to us either on this thread or via the normal support channels. Doing so will help us with providing an even more stable and reliable product in the future.

    • Official Post

    Hi,

    unfortunately I can't use my MixedReality-Headset (Reverb G2) with 3.5. Anyone else hjaving issues here? Enscape just won't recognize the headset. 3.4 works without issues.


    Beside that the visual improvements of 3.5 are really impressive and a great step forward.

    I'm sorry to hear about - Right away, can you uninstall SteamVR (if it's present on your machine as it's not required or used anymore with our latest previews) and also try re-installing Windows Mixed Reality?


    If that makes no difference what so ever, then please definitely further submit a feedback report with logs as our developers would really like to look into this behavior further: https://learn.enscape3d.com/bl…sing-the-feedback-button/


    Feel free to let me know once you've sent it in as well.

    • Official Post
    Code
    请问为什么SU转OBJ的格式ENSCAPE无法识别?

    Pardon me, could you perhaps rephrase that or also translate it to English? I'm not sure if my own translation is correct so I don't fully understand the question, and if this is only related to Preview 14? Thanks in advance.


    I've been missed some items in the mirror and the previous version we had reflected in the mirror, now this version it's gone.

    I appreciate the report. Right away, I reckon the Visual Settings were the same in Preview 13 and 14, especially the Rendering Quality?


    Also, those are renderings you've shared, correct? Or are these perhaps captures of your live walk-through?


    Further, which graphics card are you currently using with Enscape and is there a chance you could kindly share the scene with me so that I can try reproducing this as well? Let me know if possible and I'll send you a personalized link to confidentially upload the scene.

  • Ich verwende ENSCAPE3.5P13 und die Spiegelreflexion ist viel besser als zuvor. Aber es kann nicht aus jedem Blickwinkel perfekt dargestellt werden. Außerdem scheint das Echtzeit-Update nicht rechtzeitig aktualisiert zu werden. Ich kann einige der Renderings und Szenen teilen, die ich geteilt habe, aber als chinesischer Benutzer, dessen Fremdsprachenniveau nicht hoch ist, gibt es Kommunikationsprobleme. Ich bin Verzeihung.

  • I appreciate the report. Right away, I reckon the Visual Settings were the same in Preview 13 and 14, especially the Rendering Quality?


    Also, those are renderings you've shared, correct? Or are these perhaps captures of your live walk-through?


    Further, which graphics card are you currently using with Enscape and is there a chance you could kindly share the scene with me so that I can try reproducing this as well? Let me know if possible and I'll send you a personalized link to confidentially upload the scene.

    This's my setting and system information (Revit 2022). I'm very pleasure to test the new Escape Preview and give this feedback. (This scene's my client so I could share a bit.)

    • Official Post

    an.ngo2 , thank you I appreciate the reply! Pardon to ask again but just to make sure: You experience this in renderings or live view? So, does this occur in your final results too, or just when walking through the scene?


    I've also sent you a direct message in regards to uploading the scene or at least parts of it, please check it out as well.


    Ich verwende ENSCAPE3.5P13 und die Spiegelreflexion ist viel besser als zuvor. Aber es kann nicht aus jedem Blickwinkel perfekt dargestellt werden. Außerdem scheint das Echtzeit-Update nicht rechtzeitig aktualisiert zu werden. Ich kann einige der Renderings und Szenen teilen, die ich geteilt habe, aber als chinesischer Benutzer, dessen Fremdsprachenniveau nicht hoch ist, gibt es Kommunikationsprobleme. Ich bin Verzeihung.

    Feel free to indeed share some of the scenes with me if possible, or at least a few example renderings would also indeed be great. I reckon you've already tried Preview 14 as well? If you haven't please try our latest update as well.

  • Code
    ENSCAPE3.5-P14是反向更新,小场景用P13正常渲染换成P14直接报错。SketchUp2023,显卡3060-12G<img src="https://forum.enscape3d.com/wcf/index.php?attachment/42243-img-20230306-014034-autoscaled-jpg/" class="woltlabAttachment" data-attachment-id="42243" id="wcfImgAttachment0" >
    • Official Post

    Dear Forum Community,


    We've just released the latest Enscape v3.5 Preview - Version 15.


    NEW:

    Improved SpaceMouse Support

    • Custom Enscape button actions
    • Fix for mode switch not working for some customers
    • New navigation modes provided by 3DConnexion
    • Better movement in Object Mode with better center of rotation adjustments


    Please note:

    To be able to use the hotkey buttons you currently have to go into the 3DConnexion settings and configure them for Enscape manually. We also recommend setting "Camera Mode" as the navigation mode in the advanced settings. We expect these settings to ship as defaults with the next 3DConnexion driver update.


    UPDATE:

    Nvidia 531.18 Driver Crash

    We’ve implemented a workaround for the driver crash with the latest Nvidia drivers.


    Enscape No Longer Recognizes Favorite Views Created With Enscape 2.x

    Enscape will no longer recognize the favorite state of views in projects that were created with an Enscape version older than Enscape 3.0 and have not been opened with Enscape 3.x since then. If you still need the favorite state for the views in such a project, just open the project once with Enscape 3.4.


    BUGFIXES:

    Image Capturing Crashes

    We’ve improved the stability of image capturings with hardware ray-tracing enabled, which previously ran into a driver timeout (TDR).



    Please refer to this article for instructions on how to download the Preview version.


    If you wish to get a full overview of what's been added with Enscape 3.5 Preview 14 and full releases prior, check out this release/preview notes gathering thread here.


    Preview versions are not production-proven, so be aware that there can be issues, and please report any of them back to us either on this thread or via the normal support channels. Doing so will help us with providing an even more stable and reliable product in the future.