I thought this was just a local problem, but I uploaded a web stand-alone and I can see the same pattern:
https://api2.enscape3d.com/v1/…63-4305-b75e-78971039e688
Is this because of things on this side of the web? Or can everyone see the grid?
I thought this was just a local problem, but I uploaded a web stand-alone and I can see the same pattern:
https://api2.enscape3d.com/v1/…63-4305-b75e-78971039e688
Is this because of things on this side of the web? Or can everyone see the grid?
This was in Chrome, Edge said that WebGL was not supported. Installed Firefox: it worked and going back to Chrome it worked too... but I didn't have Enscape open this time... loaded up enscape with a big model and tried again... no grid. (I can see the lighting grid within Enscape*, but not in the web stand-alone, even when loading it again.)
... Load Firefox to try it again... says WebGl is not supported (it was working 2 mins ago!)... turn on 'webGL force' and 'force compatibility'... nope.
(*different model, within Enscape:)
From the looks of it I would guess that the glitch must be with memory and the GL stuff behind Enscape
We have had numerous reports on this issue but so far have not been able to fix it. We will continue to find out about the reason behind it.
Just because it's a new release (Enscape-Setup-2.4.2.2124-gd384852) and I'm still regularly encountering this glitch...
Normally I only see it with larger models where I get to navigate around a little bit, render a few images and then the grid shows up and I have to re-load to get rid of it. (The render will show this too).
I too have this issue but not as much as I recently upgraded my ram to 64GB. I find A restarting the render or restarting the pc also helps fix this for a while.
guys dont u got reflection on the wall ? if yes just turn it off .....
Unfortunately we do not have an idea what causes this yet. It also happens rarely and unpredictably. It may also be a driver issue but we do not know yet.
Next time it occurs I will try and pay close attention to I was doing at the time and see if that helps... I'm a bit busy just now with smaller models.
Next time it occurs I will try and pay close attention to I was doing at the time and see if that helps... I'm a bit busy just now with smaller models.
That would be great - thanks a lot.
hi there,
i also have some kind of pattern going on with this rectangular light...
I have a similar issue where a sudden stop of the IES light and a dark rectangle appears when I apply a bump map to the walls for paint. If that helps.
hi there,
i also have some kind of pattern going on with this rectangular light...
Thanks for reporting, we've reproduced it!
Can someone help me about this glitches?.
This could never be reproduced on our side so we could fix it If you have a reproducible case - you are very welcome to share it with us!
This could never be reproduced on our side so we could fix it
If you have a reproducible case - you are very welcome to share it with us!
Hi Alexander Devaykin what you mean by reproducible case?