3D Connexion Space Mouse

Quote from 4interiors

Waiting for the new drivers 10.7.1 I post the link of this beta driver that I tried and that works for me. We need to uninstall the old 10.5.15 or older ones and install new drivers (it works for me with 10.6.7) and then install the beta driver for SketchUp 2021. This solves the problems we had from 10.6.0 onwards. I've tried and I'm working on it, SketchUp pro 2021- Enscape 2.9.1 - Space mouse Enterprise. Hope version 3.0 preview 3 is compatible with SketchUp 2021!

Support for SketchUp 2021 on Windows - 3Dconnexion SE

Hey 4Interiors I am not completely sure I followed you.. Can you confirm below?

1. Uninstall 3d connexiion 10.5.15

2. Install (latest?) 3d connexion driver?

3. What beta driver for skp 2021? Or were you just doing this before 2021 skp was official?

Not 100% sure I followed your description? Is this with copying anything into the 2021 plugins folder or just with the driver updates?

Just saw the 10.7.1 drivers that provide support for SKP2021 have gone to stable version, the folks over at the SketchUp forums mostly are positive, these drivers should work fine.

Quote from dvsone1440

Hey 4Interiors I am not completely sure I followed you.. Can you confirm below?

1. Uninstall 3d connexiion 10.5.15

2. Install (latest?) 3d connexion driver?

3. What beta driver for skp 2021? Or were you just doing this before 2021 skp was official?

Not 100% sure I followed your description? Is this with copying anything into the 2021 plugins folder or just with the driver updates?

I posted on December 11th after a few days of testing. I didn't know exactly when 10.7.1 was released

Quote from MatthiasL

Just saw the 10.7.1 drivers that provide support for SKP2021 have gone to stable version, the folks over at the SketchUp forums mostly are positive, these drivers should work fine.

So these drivers had me all excited.. They work perfectly in skp 2020. Then I started using 2021 skp and back to the same old problem. Using it in encape stops it from working properly in skp. You cant go back and forth. So disappointing.

Hi,

Can somebody send me, please, the old 10.5.15 driver?

I can't find it on 3DConnexion's website. There is a version 10.4.10 and the next is 10.6.3.

I'd really appreciate it.

Thanks

Quote from abcgestudio

Hi,

Can somebody send me, please, the old 10.5.15 driver?

I can't find it on 3DConnexion's website. There is a version 10.4.10 and the next is 10.6.3.

I'd really appreciate it.

Thanks

I believe I have it in this folder. https://www.dropbox.com/sh/hon…CHlFQeSwfppDWhZdHj1a?dl=0

Quote from dvsone1440

I believe I have it in this folder. https://www.dropbox.com/sh/hon…CHlFQeSwfppDWhZdHj1a?dl=0

Hey, thanks a lot dvsone1440 ! I own you a beer...

Hi,

Just let you know that with the latest 10.7.3 driver both Sketchup2021 and Enscape works correctly, no problem switching between them.

Quote from abcgestudio

Hi,

Just let you know that with the latest 10.7.3 driver both Sketchup2021 and Enscape works correctly, no problem switching between them.

That's really good to know - thank you very much for the feedback!

Same here!

I just updated to newest preview version, now i can only use the 3d mouse in Enscape.... in the past I could switch windows and use them with no problem!

Looking forward to a solution

Quote from Diegondiim

Same here!

I just updated to newest preview version, now i can only use the 3d mouse in Enscape.... in the past I could switch windows and use them with no problem!

Looking forward to a solution

I'm sorry to hear about this - do you experience this in our now latest preview as well?

Hi Demian!

I recently upgraded to the 3.1 Version. Still no success.... Once the sketchup and enscape are open, the 3D mouse will only work with enscape,

so for now i have been using version 3.0.2+45914, where it works on both at the same time.

Cant wait for a solution! Thanks!

I copy and paste what I wrote in the email I sent to Enscape support on July 12th:

-Currently I use preview 9 with great satisfaction for the beauty of the images.

I take this opportunity to report the problem I have with Preview 10 and which I think also have all the other users who use 3Dconnexion peripherals.

The problem is that once you start Enscape and use the 3d mouse in Enscape it no longer works in Sketchup even though the software continues to work.

With Preview 9 everything works fine.

What happened ?

Is it possible that no one in your staff uses one of these peripherals or that they have not noticed the problem?

Since I think we are close to the release of the official 3.1 I urge you to solve the problem that for me and many other users is very important.

I would not like to find myself stuck at Preview 9 for months !!!!!!!!!!!

As expected users using 3dconnexion with SketchUp are stuck at Preview 9 !!!!

Diegondiim and 4interiors , thanks a lot for the report and further Feedback - I will escalate this accordingly and your input will be forwarded to our developers directly.

Agreed. This is very important to the workflow at my company. Navigating enscape is a breeze with a space mouse. I definitely would like to see it not breaking every time a new update comes.

SU version: 21.0.391 64-bit (windows 10)

Enscape 3.1.0+51316

3DxWare 10.7.3.3339

3DxWinCore 17.7.3.18412

All working well for me. Spacemouse wireless.

*Don't intend on updating to the 21.1 SU version just yet.

Quote from Tim

SU version: 21.0.391 64-bit (windows 10)

Enscape 3.1.0+51316

3DxWare 10.7.3.3339

3DxWinCore 17.7.3.18412

All working well for me. Spacemouse wireless.

*Don't intend on updating to the 21.1 SU version just yet.

Display More

Good to know. I will update Enscape but not skp

We're sorry about this behaviour, but to spread some good news: Our developers have been contacted as promised and a fix is in the works! Please stay tuned.

Have just updated to Enscape 3.1 public release and have noticed as soon as enscape is open my space mouse stops working in Archicad 24 however close enscape and starts working again straight away.