What if you start by using a curtain or a bedspread etc;
make a solid of it;
give it glass as material;
give it a water bump texture;
adjust other parameters
?
Posts by timeless
-
-
BREAKING - WINDOWS 11 NEWS (Win Pro 11 - 21H2)
Built 10.7.3.3339 - no problems in SU & E3D
Built 10.7.4 - no problems in SU & E3D
;)))
-
Display More
You can gladly send us a Feedback report each so we can go over your system and let you know if everything is up to date and there aren't any visible problems in the logs.
Otherwise, RTX, in general, is rather performance-intensive, especially when VR is enabled since the image has to be rendered in 1. high resolution 2. high framerate and also 3. once for each eye, so twice in total - Especially the third point costs a lot of performance, so the framerate would naturally go down and the 45hz mode is activated. That is why we recommend disabling RTX for now when using VR. If you look online you will also find that there aren't really any larger native VR games/applications which make use of raytracing in the first place.
Furthermore, if SteamVR is activated alongside then there will always be a performance loss I'm afraid, which was and is always the case with Oculus products since they do not directly use SteamVR, in this case for example the Oculus Quest uses the Oculus application/runtimes themselves on top of SteamVR so to speak, this can sometimes cost up to 20-30 FPS from experience - just for your information. (Generally, just as a side note only related to Oculus devices and VR in general: For SteamVR applications/games you can also use "OpenComposite" to skip SteamVR entirely and only use the Oculus app which helps with performance.)
If you also experience problems when RTX is off, let me know and definitely send in a report then too.
I can confirm;
RTX OFF
- WOBBLING solved on VR device/ still on PC screen a very wobbling image
- BRIGHTNESS of the image is kept normal
RTX ON
- WOBBLING with ONLY NVIDIA DLSS ON still gives a wobbling image (VR), but LESS than with the two other options activated (Denoiser + Raytrace Sun)
- BRIGHTNESS is way blown up/ doesn't represent the pc brightness
Hope this input helps.
Cheers!
-
Display More
Hello Demian Gutberlet ! Thanks for the reply.
Yes, drivers are all up to date.
The image in the headset is very, very shaky and nauseating, impossible to use. Lowering render quality or disabling DLSS altogether does not help, the issue persists. This was never a problem with Enscape 2.x.
I'm running a 2080ti with 32gb DDR4 3600 and a 3900X.
I'm having the same issue...
-
Have you tried the "Scalp" plugin?
sKalp
-
Thanks a bunch, jnurnberger and renderwiz , that makes it a lot more clear - I'll put everything together and forward it to our product management team as always. I appreciate the feedback!
Yes, exactly. If Enscape could balance the above 2 images' exposures so the interior and exterior exposure looked good, that would be amazing. Renders out windows could match what our human eye sees and in the end would require a lot less photoshopping and adjusting so that the interior and exterior look nice. Thanks for the clarification renderwiz
+1
-
invisible geometry turned off?
-
Display More
Hi Shaun, I have enscape 3.1 and Nvidia RTX 2080S graphics card with enhancements enabled. I not have problem with glass or mirror reflections.
Example:
Texture Framed whit glass
Glass Framed whitout Texture
Mirror
This is because you only have one person to cast the reflection in the mirror. If you have a big square like Shaun, it gets more complicated. The engineers at E3D always try to strike a delicate balance between performance and reflections.
In my opinion, PCs are not yet powerful enough to have this output.
But, I think it would be useful to have the option to select one or more surfaces that should reflect perfectly even with slower render times. If the application would take in account your pc built (GraphicsCard/ RAM/ CPU/ ... ) , that would be even greater. TIP Demian Gutberlet
-
Did you test this in Enscape?
Demian Gutberlet to my big supprise my previous suggestion only works in SU and not in E3D. Any technical possibilities in here?
-
NO images...?
-
In SU.
1/ open 'ENTITY GROUP' panel
2/ Press the button 'DON'T CAST SHADOWS'
-
Interior architect from the Netherlands, check!
I would like to DM you with some questions regarding the (BIM) use of ArchiCAD vs other solutions like REVIT, VECTORWORKS, etc...
-
-
timeless I'm afraid your inquiry might be a bit too specific given that our ArchiCAD userbase is not as huge as SketchUp / Revit, and the user would have to come from Belgium as well course. I've still gladly pinned your post for the next few days so that anyone who stumbles into the ArchiCAD subforum should also see your thread.
Thanks you so much @DemainGutberlet
-
... anyone? Where is the power of ther community?!
-
Dank je wel Guy! Je blijft me verbazen...
-
Any PM possibility to pop-up some questions?
-
A M A Z I N G - THX for sharing !
-
-
